Appendix A – Managing Configuration Files
155
Modula Instruction Manual
6.
For the first switch, click the source channel (input) and one or more destination channels (outputs).
Select multiple destination channels by holding down the Control key while selecting the channels.
7.
Click the Assign Switch button.
The input appears in the Assignment column of the Destination Channels list; the switch will
execute when the local preset is executed.
8.
Disconnect inputs* or outputs as part of the local preset by selecting either the source or destination
channel and clicking the Disconnect button.
The input or output appears in its corresponding Disconnected Channels list; the input or output will
be disconnected when the local preset is executed.
9.
Repeat Steps 7, 8, and 9 for all switches and/or disconnects to be included in the preset.
Note:
For information on the other buttons and preset modifications, press F1 while the
Manage Local Presets dialog box is open.
10.
After all switches for the preset have been assigned, click OK and then close the Manage Local
Presets dialog box.
11.
Define additional local presets by repeating the steps.
12.
Load the configuration file onto the system (see page 156); see Caution below.
If the configuration file has already been loaded to the system and local presets are the only
modifications that have been made to the file, select “Configure All VM Local Presets” (found
under Configure \ Configure Special – Virtual Matrix).
13.
Using Save As (under the File menu), make a duplicate copy of the modified file with a new name
and save it to the PC. (We
strongly
recommend making a duplicate copy every time the file is
modified.)
Caution:
The system must not be actively switching when loading this information onto the system.
* Disconnecting an input will disconnect
all
outputs it is connected to.
The Assignment column shows
three switches that will be
executed as part of Preset 1:
Input 2 to Output 5
Input 3 to Output 6
Input 7 to Output 8
The Disconnected Channels box
shows that Output 1 will be
disconnected as part of Preset 1.
Summary of Contents for AutoPatch Modula
