Installation and Setup
29
Modula Instruction Manual
Linking a Modula to Multiple 10Base-2 (BNC) Enclosures
Important:
Always attach 50-ohm termination connectors to the open ends of the T-connectors on
the Media Converter and on the last enclosure on the coax cable run in multiple-enclosure systems.
A Modula can link to multiple BNC enclosures in a daisy chain with RG-58 coax cable (FIG. 14). The
total distance between the two end termination connectors in a multiple-enclosure system with BNC
ports cannot exceed 10 ft. (3.05 m).
To link a Modula to multiple enclosures with BNC ports:
1.
Fasten a T-connector to the Ethernet (BNC) linking connector on the Modula’s CPU.
2.
Attach a 50-ohm termination connector to one end of the T-connector.
3.
Fasten T-connectors to the Ethernet (BNC) linking ports on the remaining enclosures.
4.
Attach an RG-58 coax cable from the open end of the T-connector on the Modula to the
T-connector on the next enclosure.
5.
Link remaining enclosures in a daisy chain using RG-58 coax cable attached to the T-connectors.
6.
Attach a 50-ohm termination connector to the open end of the T-connector on the last enclosure in
the daisy chain.
When power is applied, the Comm (Communication Status) indicator at the top of the CPU board
illuminates indicating traffic between enclosures.
FIG. 14
Modula linked to two enclosures via 10Base-2 (BNC) ports
T-Connector
50-ohm Termination Connector
T-Connector
T-Connector
50-ohm Termination Connector
RG-58 Coax Cable
Up to a total of 10 ft. (3.05 m)
page 29
Summary of Contents for AutoPatch Modula
