AMX AutoPatch Modula, Instruction Manual, Page: 77 / 191

RGBHV+Stereo to CatPro Boards with TXs & RXs
71 Modula Instruction Manual
RGBHV+Stereo to CatPro Boards Specifications
Applies to RGBHV+Stereo to CatPro input board FG1034-487 and output board FG1034-490 when
used in conjunction with CatPro RGBHV+Stereo TX and RX Modules using Cat5e cable (for module
specifications, see page 72).
Also applies to these boards when contained in pre-engineered systems using CatPro TX and RX
Modules.
* Signals displayed using a resolution of 1600x1200 at 60 Hz may exhibit slightly visible background noise in
certain circumstances (particularly with LCD monitors).
** Overall transmission distance including input and output cannot exceed 1,000 ft. (305 m) from source to
destination.
*** All measurements were taken using Cat5e cable.
Video Specifications
Parameter Conditions Value
Signal Types RGBHV and stereo audio
Maximum Resolution 1600x1200* (4:3) and
1920x1080p (16:9)
@ 60 Hz up to 1000 ft.** (305 m)
RGB In
Signal Level Range (max.) Terminated, user adjustable gain and peak
using CatPro Wizard +0.75 V to -0.3 V typical
RGB Out
Signal Level Range (max.) Terminated, user adjustable gain and peak
using CatPro RX Module +0.75 V to -0.3 V typical
RGB In
Skew Adjustment User adjustable using CatPro Wizard 0 to 62 ns in 2 ns increments
on R, G, and B channels
RGB Out
Skew Adjustment User adjustable using CatPro RX Module 0 to 62 ns in 2 ns increments
on R, G, and B channels
RGB In/Out Impedance 75 ohms
RGB Signal to Noise Ratio >50 dB
RGB Crosstalk f = 30 MHz
f = 5 MHz <-35 dB
<-50 dB
RGB Return Loss f = 5 MHz <-35 dB
Sync In Impedance 510 ohms
Sync In/Out Polarity Output follows input polarity Active high or low
Sync Out Signal Levels Unterminated Low = 0 V
High = +5 V
Supported Twisted-Pair
Cable Types*** Cat5, Cat5e, Cat6, Cat6e, STP
(skew-free cable is not
recommended)
RGBHV+Stereo
Connector Options Female RJ-45