AMX AutoPatch Modula, Instruction Manual, Page: 131 / 191

Cat5 Video and Audio Boards with TXs & RXs
125 Modula Instruction Manual
Cat5 TX and RX AF-10 Boards and Numbers
Note: Specifications for these AF-10 boards are listed on page 126 .
* High headroom – up to a +22 dBu signal
Cat5 Video and Audio Boards Specifications
Applies to Modula Cat5 Video and Audio input and output boards FG1034-488 and FG1034-494 when
used in conjunction with Cat5 TX and RX Modules or AF-10 boards.
Also applies to Cat5 Video and Audio boards contained in pre-engineered systems.
Cat5 S-Video+Stereo TX and RX AF-10 Boards
TX RX Connector Types
FG1040-410 FG1040-425 RCA / RCA unbalanced
FG1040-413 FG1040-428 S-Video / RCA unbalanced
FG1040-416 FG1040-431 S-Video / 3-position unbalanced
FG1040-419 FG1040-434 BNC / 3-position unbalanced
FG1040-422 FG1040-437 BNC / RCA unbalanced
FG1040-440 FG1040-446 S-Video / 3-position balanced (HH)*
FG1040-443 FG1040-449 BNC / 3-position balanced (HH)*
Video Specifications
Parameter Conditions Value
Frequency Response
f = 35 MHz or better, 3 ft. (0.914 m) ±3 dB
f = 15 MHz or better, 300 ft. (91.44 m) ±3 dB
f = 10 MHz or better, 1000 ft. (305 m) ±3 dB
f = 5 MHz <50 dB Crosstalk
Differential Gain f = 3.58 MHz, 10 to 90% APL <0.2% or better
Differential Phase f = 3.58 MHz, 10 to 90% APL <1º or better
Signal to Noise Ratio Vin = 0.7 V, 100 IRE >65 dB
Input Level (max.) ±1 V
Input Impedance 75 ohms
Output Level (max.) ±1 V
Output Impedance 75 ohms
Signal Type Composite, S-Video
Supported Twisted-Pair
Cable Types Cat5, Cat5e, Cat6
Connector Options RJ-45
page 99