Setup Options
24
CP-15 Instruction Manual
Setup Options
Using the Setup Options submenu, you can check the software version information, set the default
virtual matrix, and reload the configuration file.
Checking the Software Version
Software Version Screen
The Software Version Screen provides the following information:
Driver
– control panel’s firmware version
Built
– date the control panel’s software was built
Host
– software version of the initial operating system (IOS) for the control panel
XNet ID
– control panel’s XNNet device number
FP Link baud 115200
– indicates a front control panel and the baud rate
Or
Bridge
– indicates a remote control panel and the version of its communication link to the
enclosure’s CPU
Use the following steps to check the software version information for the CP-15 Control Panel.
To check the software version information:
1.
Press the Function Key.
The Function menu appears.
2.
Locate Setup Options by scrolling with the Control Dial.
3.
Press the Select Key.
The Setup Options submenu appears.