Setup Options
25
CP-15 Instruction Manual
4.
Press the Select Key again to choose Software Version.
The Software Version Screen appears.
5.
Scroll to see additional Software Version information.
6.
Press the Cancel Key to return to the Setup Options submenu.
Or
Press the Function Key to return to the Function menu.
Choosing the Default Virtual Matrix
You have the option of changing the factory default virtual matrix for your system. When you choose a
new default virtual matrix, the system will revert to that virtual matrix each time the system is powered
up even if you changed the virtual matrix using the V. Matrix list during normal operation. The power
must be cycled before the default virtual matrix changes are implemented. If you want to immediately
switch on the default matrix, either change the current virtual matrix (see page 9) or cycle the power.
If changes are made to the configuration file, check to be sure that the system is using the correct default
virtual matrix.
The example below selects Virtual Matrix 2 “Audio, Stereo” as the default virtual matrix.
To choose the default virtual matrix:
1.
Press the Function Key.
The Function menu appears.
2.
Locate Setup Options by scrolling with the Control Dial.
3.
Press the Select Key.
The Setup Options submenu appears.
4.
Scroll to Default VM. Press the Select Key.
The Default VM list appears.
5.
Scroll to
2:Audio, Stereo.
6.
Press the Select Key.
The display returns to the top of the Setup Options submenu, and Virtual Matrix 2 “Audio, Stereo”
is the default matrix.
Version Number
Current Default VM