Introduction
5
CP-15 Instruction Manual
Menus & Modes
The Function menu and its submenus access the different modes and lists used to control the system. The
modes are Change, Disconnect, Status, Output Volume, Mute, Input Gain, and Lock. While in a mode,
the same type of operations can be performed, e.g., when in Mute Mode you can select various outputs to
mute and un-mute without having to repeatedly put the CP-15 into Mute Mode.
This section provides an overview of the menus and modes. Detailed information and instructions on the
individual modes are provided in the remaining sections.
Use the Control Dial and Select Key to navigate the Function menu, submenus, and lists. The menus are
loop menus, which means that each menu returns to the first item after you scroll past the last item.
The Function menu (FIG. 5) and its submenus access the following
modes and lists:
Change
Selecting Change places the system in Change Mode. The CP-15
must be in Change Mode to execute switches. While in Change Mode,
select the Input and Output(s) Keys followed by the Take Key to
execute switches (see page 8).
Virtual Matrix
Selecting Virtual Matrix accesses the list of virtual matrices that are
defined for the system. This list is used for changing the virtual matrix
on which operations will be performed (see
page 9).
Status
Selecting Status places the system in Status Mode. While in
Status Mode, signal status can be verified to confirm correct routing
or routing to multiple outputs without risk of accidently executing a
switch (see page 12).
FIG. 5
Function menu structure
Disconnect
Selecting Disconnect places the system in Disconnect Mode. While in Disconnect Mode, select the Input
or Output Key(s) followed by the Take Key to disconnect switches (see page 10). While in Disconnect
Mode, the CP-15 does not indicate the current routing of selected inputs or outputs.
Setup Options
Selecting Setup Options accesses the Setup Options submenu to check the
Software Version
, change the
Default VM
(Virtual Matrix)
, or
Reload Config
file (see page 24).
Lock Panel
Selecting Lock Panel places the panel in Lock Mode at which time the password is entered to lock the
panel. Locking the CP-15 limits access which can prevent accidental switches (see page 22).
Adjust Audio
Selecting Adjust Audio accesses the
Adjust Audio
submenu. From this menu you can place the panel in
Output Volume
Mode,
Mute/Unmute
Mode, or
Input Gain
Mode (see page 17).
Global Preset
Selecting Global Preset accesses the Global Preset submenu to
Define Global Presets
or
Execute
Global Presets
(see page 15).