Installing a CP-15 Remote Control Panel
28
CP-15 Instruction Manual
To connect a CP-15 Remote to an AMX AutoPatch Matrix Switcher:
1.
On the CP-15 Remote, unplug one of the Comm Link connectors.
2.
Loosen the two outer screws on the connector.
3.
Insert the two wires of the XNNet cable into the two outer slots of the connector, leaving the center
slot empty (FIG. 9).
Note that either wire can be inserted into either of the outer slots.
4.
Tighten both screws and plug the connector back into the Comm Link.
5.
On the router’s CPU, unplug the XNNet connector (for XNNet connector location, see the matrix
switcher documentation).
6.
Loosen the two outer screws on the connector.
7.
Insert the two wires from the CP-15 Remote into the two outer slots of the connector from the CPU,
leaving the center slot empty (FIG. 10).
Note that either wire can be inserted into either of the outer slots.
8.
Tighten the screws and plug the connector back into the CPU.
FIG. 9
Insert the wires into a Comm Link
FIG. 10
Insert the wires into the XNNet connector on the CPU (Optima shown)
XNNet Link Cable to the Router