Locking & Unlocking
22
CP-15 Instruction Manual
Locking & Unlocking
The CP-15 can be locked by entering a sequence of Input Keys. Locking the panel prohibits access to the
system and can prevent accidental switching. The password can be any combination of the first eight
Input Keys. The factory default password is the first five Input Keys (1 2 3 4 5). For setting the
password, see page 23.
While the control panel is locked, BCS commands still work; however, they cannot be used to unlock the
panel. The panel remains locked if the power is cycled. If the password is lost while the system is locked,
contact technical support
(for contact information, see page 34).
Locking the Control Panel
The following example uses the default password of “1 2 3 4 5” entered using the first five Input Keys.
If you enter the wrong password while attempting to lock the control panel, an invalid password message
appears and the Cancel Key flashes. Press the Cancel Key to clear the error and enter the correct
password.
Note:
For security purposes, the Input Keys do not turn white when pressed while locking and
unlocking the panel.
To lock the control panel:
1.
Press the Function Key.
The Function menu appears.
2.
Locate Lock Panel by scrolling with the Control Dial.
3.
Press the Select Key.
The system is in Lock Mode (the Input and Output Keys turn blue).
4.
Press the Input Keys in the following order: 1, 2, 3, 4, 5.
The panel is locked, and all Input and Output Keys turn off.