manualshive.com logo in svg

AMX AutoPatch CP-15, Instruction Manual, Page: 26 / 38

Share
Download
AMX AutoPatch CP-15 Instruction Manual Download Page 26

Locking & Unlocking

23

CP-15 Instruction Manual

Unlocking the Control Panel

When the panel is locked and you press any key, the Unlock Panel Screen appears and you have ten (10) 
seconds to enter the password, or the control panel remains locked. If you wait longer than 10 seconds, 
press any key again before entering the password. 

If you enter the wrong password while attempting to unlock the control panel, an invalid password 
message appears and the Cancel Key flashes. Press the Cancel Key to clear the error and enter the 
correct password. 

The following example uses the default password of  “1 2 3 4 5” entered using the first five Input Keys.

To unlock the control panel:

1.

Press any key.
The Unlock Panel Screen appears, and the Input and Output Keys turn blue.
You 

must

 enter the password within ten (10) seconds.

2.

Press the Input Keys in the following order:  1, 2, 3, 4, 5.
The panel unlocks and returns to the Function menu.

Setting the Password

The password can be set in the configuration file using XNConnect. The password can be any 
combination of the first eight Input Keys (keys can be used multiple times). 

To set the password and load it to the CP-15:

1.

Connect the enclosure to a PC running XNConnect (for more information, see the XNConnect
Help file).

2.

Open the configuration file in XNConnect.

3.

Select the Hardware tab.

4.

Right click the CP-15 Control Panel and select Set Password from the menu.
The Set Control Panel Password dialog box opens.

5.

Enter a number that corresponds to one of the first eight Input Keys into each field.

6.

Check the box for Configure Password Immediately, and click OK.

Or

 

Click OK, and select Configure All Passwords from the Configure menu (under Configure 
Special – Hardware).

7.

Save the modified configuration file.

Summary of Contents for AutoPatch CP-15







































Reviews:

No comments