AMT Bridle Standard, Directions, Indications, & Contraindications For Use

Page: 9 / 112

7
9
11
10
12
8
Directions for Use – AMT Bridle
™
Standard
7
ENGLISH
STANDARD CLIP:
Close the clip by folding over the plastic edge and firmly snapping
it closed.
After the clip has been fully closed, tie the two umbilical tape ends
together (excluding the tube) creating a simple knot. Repeat 2-3
times.
Clip Opening Tool: If the clip must be opened, place the side of the
opening tool into the clip. Push in and turn slightly to open.
NOTE: Ensure proper position of the nasal tube, umbilical tape and
clip prior to closure.
ALSO NOTE: Some nasal tubes are more rigid than others and may
require a higher force to close clip.
WARNING: Do not use any foreign object to open or close the clip
as this may cause damage, making it less secure and/or ineffective.
If damaged, use a new clip.
NOTE the placement of the AMT Bridle
™
in the patient’s chart.
WARNINGS: Throughout the useful life of the AMT Bridle
™
, the clip
must be visually inspected for signs of damage or loose attachment
to the nasal tube. Monitor the clip and nasal tube position regularly
for nasal tube migration.
REMOVAL: To remove the AMT Bridle
™
and nasal tube: cut only ONE
strand on the umbilical tape. Gently pull both the AMT Bridle
™
and
nasal tube out of the nose.
To remove only AMT Bridle
™
: Cut only ONE strand of the umbilical
tape and open the clip. Gently pull on the opened clip to remove the
catheter from the nose.
NOTE: After removal, dispose of the device following facility
protocol, local disposal guidelines, or through conventional waste.
CAUTION: Great care must be taken to prevent accidental
swallowing as the tape can easily slide back into the nose.
NOTE: Recommended for up to 30 days continuous use.
Diagrams Page 2-3:
24: 1 cm
25: Gently pull on umbilical tape ends to verify clip is closed
26: Hold tube fixed
Diagrams Page 2-3:
27: Cut excess umbilical tape
Diagrams Page 2-3:
28: Clip Opening Tool
STANDARD CLIP: 8, 10, 12FR
Ensure nasal tube fits securely in channel. Place loose strand of
umbilical tape in the clip’s hinge.
STANDARD CLIP: 14, 16, 18FR
Ensure nasal tube fits securely in channel. Place loose strand of
umbilical tape between the softer inner portion of the clip and the
outer, more rigid plastic section.
Diagrams Page 2-3:
18: Standard Clip 8, 10, 12FR
19: Nasal Tube
20: Clip
21: Standard Clip 14, 16, 18FR
22: Nasal Tube
23: Clip