Temposonics
®
R-Series
V
Analog
Operation Manual
I 52 I
1. To adjust the sensor settings click “Enter Command Mode” on
the Interface page, type “COMMAND” into the text field, and then
click “OK”.
Fig. 68: Entering Analog command mode
NOTICE
If the sensor is in command mode, the sensor may cease to output
valid magnet position values.
2. After entry into command mode, the connection icon in the top
right will change from green to blue, and the sensor settings can
now be adjusted by clicking on the pencil icons next to the list of
values.
Fig. 69: Sensor settings can be adjusted in Analog command mode