Temposonics
®
R-Series
V
Analog
Operation Manual
I 44 I
Cables
Cable sets
Silicone cable
Part no. 530 176
Cable with M12 A-coded female
connector (5 pin), straight – pigtail
Part no. 370 673
Cable with M12 A-coded female
connector (5 pin), angled – pigtail
Part no. 370 675
Material: Silicone jacket; black
Features: Twisted pair, shielded
Cable Ø: 6.3 mm (0.25 in.)
Cross section: 3 × 2 × 0.14 mm²
Bending radius: 7 × D
(fi xed installation)
Operating temperature: −50…+150 °C
(−58…+302 °F)
Material: PUR jacket; black
Features: Shielded
Cable length: 5 m (16.4 ft)
Ingress protection: IP67 (correctly fi tted)
Operating temperature:
−25…+80 °C (−13…+176 °F)
Material: PUR jacket; black
Features: Shielded
Cable length: 5 m (16.4 ft)
Ingress protection: IP67 (correctly fi tted)
Operating temperature:
−25…+80 °C (−13…+176 °F)
Programming tools
Hand programmer for analog output
Part no. 253 124
Cabinet programmer for analog output
Part no. 253 408
TempoLink
®
kit for Temposonics
®
R-Series
V
Part no. TL-1-0-AD60 (for D60)
Part no. TL-1-0-AS00 (for cable outlet)
Part no. TL-1-0-AD34 (for D34)
Easy teach-in-setups of stroke length
and direction on desired zero / span
positions. For sensors with 1 magnet.
Features snap-in mounting on
standard DIN rail (35 mm). This
programmer can be permanently
mounted in a control cabinet and
includes a program/run switch.
For sensors with 1 magnet.
• Connect wirelessly via Wi-Fi enabled
device or via USB with the diagnostic
tool
• Simple connectivity to the sensor
via 24 VDC power line (permissible
cable length: 30 m)
• User friendly interface for mobile
devices and desktop computers
• See data sheet “TempoLink
®
smart assistant” (document part no.:
552070
) for further information
Controlling design dimensions are in millimeters and measurements in ( ) are in inches
Color of connectors and cable jacket may change. Colors of the cores and technical properties remain unchanged.