Ampeon AMP-EE01, User Manual

Page: 2 / 24

Ver1.91 2013-10-13
P r e f a c e
Thanks for choosing AMPEON’s high-performances metal and spark diverter AMP series. The
AMP series is manufactured with high-quality components and materials and incorporates the
latest microprocessor technology available. Jiangsu AMPEON continuously practices the design and
innovation of the product and provides excellent products with professional attitude. Furthermore,
it responds to the customers with professional service and benefits each other with the customers.
The manual is to be used for the installing, parameter setting, troubleshooting and daily
maintenance of spark diverter. In order to assure the proper installing and usage of the product,
please read this manual in detail before installing. Please keep this user manual at hand and
distribute to all users for reference.
Welcome to visit the website www.ampeon.cn .
ATTENTION!
1. First please carry out the delivery inspection and check whether there is damage caused by
transportation process.
2. After unpacking, please compare with the packing list and check the type, specification and
components of the product. If it does not conform to your order documents or if you have
any questions regarding the product,
please contact to the dealer or the service office of
our company.
3. Jiangsu Ampeon Electronic Engineering Co., Ltd. provides services of the three guarantee
period 18 months from the delivery date.
4. Troubles due to lightening strike, water invasion and obvious artificial miss or damage etc.
are not in the range of repair guarantee.
5. Metal & spark diverter series products are important products of the fore-spinning
procedure in cotton spinning mill. But the users in cotton spinning mill should also take
integrated measures in fire protection equipments, selection of material, management
regulations etc. to assure the safety production.
CAUTION
！
1. The power supply must first be shut off before the electric wiring.
2. Wiring, repairing & maintenance of the machine should be carried out by electric
professionals.
3. Do not carry out compression test toward the inner components because the semiconductor
units are easy to be broken down by the high voltage and are easy to damage.
4. The circuit board CMOS integrated circuit is apt to static electricity damage. So you should
take the static electricity prevention measure before touching the circuit board with hand.
5. As the machine is installed to the pipe in high place, installing personnel should take safety
measures. Suspending or bracket should be solid to prevent the machine from dropping
down.
6. Select safety area to install the equipment, prevent the high temperature & direct shinning
and avoid humidity and splashing of the water drops.