Ampeon AMP-EE01, User Manual

Page: 7 / 24

AMPEON AMP-Series
~5~
A) Diverter AE01
B) Collecting box
C) Observation window
D) Door
E) Support for installing the
control box
F) Wiring ducts
G) Diverter controller
H) -X98 junction box
I) Cylinder
J) Water spray nozzle
K) Water storage tank
L) Air filtration reducing
valve
M) Photoelectric switch
Figure 4: Parts and external dimension of actuator unit
The diverter is connected to the existing pipeline by square to round joint pipe
and installed with metal rods, and when installing, pay attention to the direction of
inlet and outlet. Because the diverter adopts the fast reaction pneumatic mechanism,
600
～
800kPa stable and clean compressed air must be provided.
The photoelectric switch is used to be a level sensor. It indicates when collection
box is nearly full.
When the displayer is show “The collecting box is full”, the collecting box must
be emptied immediately.
ATTENTION
！
The collecting box should be installed to a proper site to avoid the diverted
material falling on the cotton bale or other machines, when the door of the
collecting box is opened.
ATTENTION
！
When emptying the collecting box, the bottom of the diverter (especially the
movable flap) may not be touched! There is danger on injury due to sudden
movement parts.