DAVINO 120TW - USER AND MAINTENANCE MANUAL Rev.04
- Pag. 64
REAR AXLE DIFFERENTIAL LOCKING KEY
Activates the locking of the rear axle differential
To operate the differential lock, make sure that the wheels of both axles are
aligned
The alignment condition of the rear axle wheels is indicated by the special indicator on the dashboard.
The alignment condition of the front axle wheels is signalled by the differential lock control key light.
If the wheels of both axles are not aligned, the locking of the differential does
not enter into operation
.
To operate the differential lock proceed as follows:
1) align the rear wheels until the special indicator on the dashboard is switched off
2) Select the 2RS steering mode (front wheels only) so that the rear wheels are locked
3) align the front wheels until the yellow light on the locking button is lit
4) Press and hold the lock button
Once the obstacle is exceeded, release the key or steer to release the differential.
DRIVING DIRECTION SELECTION KEY
Selects the direction of travel, as an alternative to the left manipulator (drive
Devioguide).
Press the forward key to select the forward gear
Press the back key to select the reverse
To enable the key as an alternative to the guide switch, use the DIRECTION
SELECTION MODE BUTTON on the dashboard.
