DAVINO 120TW - USER AND MAINTENANCE MANUAL Rev.04
- Pag. 32
For lifting and transporting heavy parts, use cranes or hoists of adquate reach.
Imburize the material in the best way. To use golfers if provided. Always make sure there are no people
nearby.
By disassembling or installin machine groups that must be supported by hydraulic or pneumatic lifting
devices, it is advisable to ensure that the equipment of this equipment is appropriate for the load to be
supported or moed.
Do no allow any personto pass near the machine and absolutely under the raised equipment even when
there is certainty that it is blocked.
Do not work above or below the machine if it is only supported with hydraulic or pneumatic lifting devices
without lock valves.
Do not work under or near a tool, machine, or disasembled parts that are not properly supported.
If repairs must be carried out at the top of the machine, use scales or platforms that comply with the current
accident regulations and always pay close attention.
The jack-lifted load is always considered dangerous.
It is mandatory to place support media in place to secure their lielihood before engaging in lifting parts.
If there is a change of being struck by metal splinters (grinding), always wear safety goggles.
After servicing or repairs do not leave tools, rags or other material inside compartments containing moving
parts.
ENGINE
Donot intervene onthe machine with the engine in motion.
Do not run the engine with the raised bonnet.
Do not check or adjust the alternator strap tension with the motor in motion.
Do not adjust the power pump with the motor inmotion.
Handling flammable materials, stay at a certain distance from exhaust manifold, silencer or hot engine
points.
BATTERY
Always disconnect the battery by using the disconnect switch before anyoperation on the lectrical system.
If replacing the battery, first disconnect the negative cable, then the positive one.
To reconnect the battery, first connect the positive cable, then the negative, then reinsert the battery switch
to give power to the system.
To recharge the battery, make sure that the auxiliary cables are connected to the terminals. Do not short-
circuit them ever.
During the recharging period of the battery, a flammable hydrogen gas is generated; leave the battery
compartment uncovered to make the ventilation more effedtive.
Never check the charge status by placing metal objects on the terminals.
GREASE AND LUBRICATION
Only use products recommended by the manufactuer and are subject to the lubrication charg.
Make sure lubrication and lubrication are carried out according to the times shown in the maintenance
schedule shown in the manual, to keep the machine in safe and efficient working conditions.
Use clothing taht is appropriate for the operations to be carried out.
Prepare the machine in the plane with the parking brake engaged and the engine switched off.
If lubrication points require lifting of machine equipment, use special safety devices. It is dangerous to
oerpate under the equipment without safety devices.
TIRES
The wheels of the machine are very heavy. You have to handle them carefully and make sure that when
they are in stock they can not fall badly to people.
Never attempt to repair a tire onpublic roads.
