www.amico.com
25
Installation: Spring Arms
1. Ensure the ceiling mount and the extension arm [1] are securely installed and the covers are removed.
2. Locate the mounting stem [2] of the spring arm and examine the electrical connection inside. If the stem is fitted
with a slip ring [3] proceed to step 3. If the stem is not fitted with a slip ring [4] proceed to step 4.
3. Remove the two screws [5] holding the slip ring to the extension arm, and lift the slip ring up and out of the way.
4. Slide the mounting stem upwards into the extension arm sleeve [6] and securely hold in place.
5. Have a second person install the following hardware (in order):
• Washer [7]
• Safety Washer [8]
• 2x Retaining Rings [9]
6. While installing the safety washer, ensure that its tooth [10] fits into the hole at the top of the mounting stem.
7. Ensure that both retaining rings snap into the groove [11] at the top of the mounting stem.
8. Insert the slip ring back into the spring arm and secure with two screws [5].
9. In order to remove a spring arm, please conduct the preceding steps 2-8 in reverse.
