www.amico.com
29
Normal System/LCH with Camera
1. Ensure the unit is disconnected from the power supply, with no possible accidental reconnection.
2. Ensure the brake screw is backed out or removed all together.
3. Apply OASYS approved grease to the male end of the lighthead and locking key before installation to ensure
smooth movement.
4. Fish the camera and power cables from the top of the drop tube, until it comes out the end of the spring arm.
Do not fish the camera controller box cable through the drop tube.
5. Remove protective cap from the light.
NOTE: Three people are required for steps 6-15.
Camera Controller
Box Cable.
Camera cable.
Power Cable
(single light)
Power Cable
(single light with camera)
Wiring through Drop Tube
Installation: Amico iCE LED Light
