46
Amico Clinical Solutions Corp.
Non-Sterilizable Handle (Plastic/Aluminum)
1. At delivery, the lamp is equipped with an aluminum or plastic non-sterilizable handle. This handle must not be
sterilized as it will cause damage to the handle.
2. The handles will be supplied with disposable, sterile covers. Handle disposable covers often become unsterile
during an operation. Therefore always keep extra disposable handle covers available for exchange.
3. An in-light camera may be purchased as an accessory to the lamp. In this case, you can remove the handle using
the below steps:
• To remove, press the release button and pull the handle away from the light.
• To attach, simply insert the handle into the handle adapter until a "click" is heard.
Lamp Housing, Protective Lens and Support System
1. The Amico lamp system has a high quality surface which can be cleaned with conventional cleaning agents.
2. The front screen is made out of high quality acrylic.
3. Pay attention to the following during cleaning:
• Never wipe over the lens system with a dry cloth (always with a clean wet cloth).
• Only use disinfectants with less than 20% alcohol.
4. Wipe the lens system after cleaning with an anti-static, non-fluffy cloth.
PROJECT MANAGER : ___________________
ENGINEERING : __________________________
PRODUCTION : __________________________
PRESS TO RELEASE
SLIDE TO SNAP IN
REV.
DESCRIPTION
BY
DATE
5
4
3
1
55 East Wilmot St.
Richmond Hill, Ontario
L4B 1A4, CANADA
Tel: (905)764-0800
Fax: (905)764-0862
DESCRIPTION:
PART NO:
SHEET:
OF
DRAWING NO:
1
1
PROJECTION
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO CLINICAL AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN UPON
REQUEST AND WITH THE UNDERSTANDING THAT NO COPIES ARE TO BE MADE WITHOUT THE CONSENT OF
AMICO CLINICAL.
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
CHECKED BY:
DRAWN BY:
NTS
SCALE:
2
A
B
C
D
FINISH:
MATERIAL:
YYMMDD-XXX
UNLESS SPECIFIED:
ALL DIMENSIONS IN INCHES
SURFACE FINISH 63 uin
BREAK ALL EDGES 0.005 - 0.010
REMOVE SHARP EDGES AND BURRS
ANGLE TOLERANCES 1
DECIMAL TOLERANCES:
X .XX .05
X.XXX .005
X.XXXX .0005
PROJECT MANAGER : ___________________
ENGINEERING : __________________________
PRODUCTION : __________________________
PRESS TO RELEASE
SLIDE TO SNAP IN
REV.
DESCRIPTION
BY
DATE
5
4
3
1
55 East Wilmot St.
Richmond Hill, Ontario
L4B 1A4, CANADA
Tel: (905)764-0800
Fax: (905)764-0862
DESCRIPTION:
PART NO:
SHEET:
OF
DRAWING NO:
1
1
PROJECTION
PRIVATE AND CONFIDENTIAL
THIS PRINT IS PROPERTY OF AMICO CLINICAL AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN UPON
REQUEST AND WITH THE UNDERSTANDING THAT NO COPIES ARE TO BE MADE WITHOUT THE CONSENT OF
AMICO CLINICAL.
ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED
DATE:
DATE:
CHECKED BY:
DRAWN BY:
NTS
SCALE:
2
A
B
C
D
FINISH:
MATERIAL:
YYMMDD-XXX
UNLESS SPECIFIED:
ALL DIMENSIONS IN INCHES
SURFACE FINISH 63 uin
BREAK ALL EDGES 0.005 - 0.010
REMOVE SHARP EDGES AND BURRS
ANGLE TOLERANCES 1
DECIMAL TOLERANCES:
X .XX .05
X.XXX .005
X.XXXX .0005
Operation: Cleaning the Amico iCE LED Light
Disconnecting and Reconnecting Sterilizable Handle
4.
