www.amico.com
9
!
WARNING – STORAGE AND USAGE HAZARD
• Store the iCE LED Series Surgical Light in its package for at least 24 hours in the respective room before
mounting, in order to equalize temperature differences.
• Make sure that the light is in perfect working order before every use.
• Attention: The light works only with an external power supply of 240 VA.
!
WARNING – SPRING-LOADED CRUSH POINT HAZARD
• The light is to be dismantled from the spring arm in reverse order of its assembly. This may only be carried out
after the spring arm has been adjusted to a horizontal position, as the arm is under spring tension and can
bounce up.
• Do not remove tension screw from the spring arm joint until the lighthead has been securely fastened onto
the spring arm.
• Never attempt to install or remove the lighthead unless the tension screw is securely locked in place.
• Extend the spring arm and replace the tension screw to lock the arm in the extended position whenever
removing the lighthead.
Safety Instructions
Tools and Part Requirements
1. Level
2. 2 mm Hex Drive
3. 2.5 mm Hex Drive
4. 2 mm Allen Key
5. 6 mm Allen Key
6. 15/16" Wrench x 2
7. 3/8" Flat Head Screwdriver
8. 3 mm Flat Head Screwdriver
9. Soft Mallet
10. Pliers and Cutters
11. OASYS provided tools included within package
