10
Amico Clinical Solutions Corp.
Safety Instructions
!
WARNING – PINCHING HAZARD
Pinch points are created during extreme articulation of the suspension system. Do not place hands on or near
the suspension knuckle during lighthead articulations.
!
WARNING – IMPACT HAZARD
Do not remove the tension screw from the spring arm joint until the lighthead has been securely fastened onto
the spring arm.
!
WARNING – POSSIBLE PATIENT INJURY HAZARD
Failure to engage the light handle cover completely may result in the cover falling from the lighthead.
!
WARNING – BIOHAZARD
• Sterile disposables are intended for single use only. Universal precautions must be observed when disposing
of any single use disposable item.
• Do not use disposable handle covers if its packaging has been damaged, torn or opened as the sterility of the
cover may be compromised.
• During surgical procedures, do not use the center focusing handle unless a disposable sterile cover is installed.
If the focusing light handle (metal/plastic, provided with lighthead) is used without a disposable cover, the
handle is not protected by a sterile covering.
• Sterilizable handles are available through Amico Clinical Solutions Corp.
!
WARNING – DISPOSAL HAZARD
This product contains materials which may require disposal through appropriately licensed and permitted
hazardous waste management firms.
!
WARNING – PERSONAL INJURY HAZARD
• Do not attempt to replace any LED module unless power is turned off and the lighthead has cooled.
• Do not attempt to replace the lamp unless power to the lighthead is turned off.
• Do not attempt to clean the lighthead unless power is turned off and the lighthead has cooled sufficiently.
• Do not attempt to adjust the suspension system. Refer servicing to qualified service personnel.
• Do not remove the lamp structural screws. Serious injury and equipment damage can occur from the falling
lamp. Only Amico certified technicians can service this component if required.
• During operation, the LED panels attain a high temperature. Serious injury can occur if touched. Allow the
lamp to cool before performing any maintenance on the lighthead.
