Ametek Sorensen Asterion DC Series, Operation Manual

Page: 94 / 157

Calibration Asterion DC Series
3-10
Figure 3-21. Ramp-Screen (Initialization)
Trigger Ramp Generates the ramp in SW trigger mode. Trigger Ramp button
will only be enabled after Initialize button is pressed, Refer to
Figure 3-22.
Figure 3-22. Voltage Ramp-Screen (SW Trigger)
Waiting for Trig This field is displayed after Initialize button is pressed in HW trigger
Mode, refer to Figure 3-23. This shows that the supply is waiting for
an active high pulse of 10ms on the MOLEX connector pin-8
(TRIGGER_IN) and pin-12 (DIN_RTN) to generate the Voltage
Ramp. Refer to Table 3-2. Analog
Programming Connector,
Designations and Functions
for PIN details.
Figure 3-23. Voltage Ramp-Screen (HW Trigger)
Abort In SW trigger mode, when Trigger Ramp button is pressed,
Trigger Ramp button changes to Abort button.
In HW trigger mode, when external trigger is received, Waiting for
Trig will change to Abort button , refer to Figure 3-24. Pressing the
Abort button aborts the ramp.