Ametek Sorensen Asterion DC Series, Operation Manual

Page: 102 / 157

Calibration Asterion DC Series
3-18
Figure 3-39. Regulation Mode
OVP Sets the power-on default value of the Over Voltage
Protection, refer to Figure 3-40.
Figure 3-40. Power On OVP Setting
Output Sense The Output Sense menu allows user to set the output voltage
sense of the unit to either Internal or External, refer to Figure
3-53. When External is selected as output sense, voltage
sense cables must be connected to rear panel of power the
supply at RVS (Remote Voltage Sense) connector.
Figure 3-41. Output Sense Setting Screen
Voltage User Limit Sets the power-on default value of the voltage User limit, refer
to Figure 3-42.