Ametek Sorensen Asterion DC Series, Operation Manual

Page: 32 / 157

Overview Asterion DC Series
1-16
5kW and 10kW Auto Range Models
Rated Voltage (V)
Voltage
&Current Rise
Time (ms),
Full load
1
Voltage &
Current Fall
Time (ms),
Full load
3
Voltage Fall
Time (ms), No
load
4
Transient
response
(ms)
5
60 50 80 1000 1
200 50 100 2500 2
400 75 150 3000 2
1)
Maximum time, from 0-100% of programming change from zero to rated output voltage with rated resistive
load.
2)
Maximum time, from 0-100% of programming change from zero to rated output voltage with No load.
3)
Maximum time, from 100%-0 of programming change from rated output voltage to zero with rated resistive
load.
4)
Maximum time, from 100%-0 of programming change from rated output voltage to zero with No load
5)
Typical time to recover within 0.5% of rated output voltage for load step of 10-90% of rated output
current
1.2.11 Remote Sense
Maximum Line
Drop
Compensation
1
40V Model 60V Model 80-600V Models
2V 3V 5V 5V 5V
Connection: Voltage accuracy/regulation specifications apply at the point where the remote sense leads
are connected.
Line Drop Effect on Output: Rated output voltage applies at the rear panel output terminals, and line drop
voltage subtracts from the voltage available at the load terminals.
CAUTION!
Due to Line Drop Compensation, if Remote Sense is disconnected from unit
while the output is enabled, output voltage will rise a maximum of 10% of
model’s maximum rated voltage, before faulting
.
1) Contact factory for additional information regarding higher voltage drop at remote sense operation. Virtual
sense option available uppon request.