Ametek OCS 500 M6, Manual For Operation, Page: 46 / 80

AMETEK CTS OCS 500 N6 series
Manual for Operation V 5.24 46 / 80
7.1.2. Standard test routines
The user can select preprogrammed standard test routines.
Page 3
Damped Osc. 3MHz IEC 61000-4-18
F1 : Common Mode
F1 F2 F3 F4 F5 F6 F7
Page 4
Damped Osc. 3MHz IEC 61000-4-18
F1 : Level 1 500 V
F2 : Level 2 1000 V
F3 : Level 3 2000 V
F4 : Level 4 4000 V
F7 : Manual
F1 F2 F3 F4 F5 F6 F7
The standard levels for common and differential mode can be changed in the setup menu.
7.1.2.1. Level test
A selected level will step through all couplings in the selected Mode. The following parameters are used:
Defined per
standard Voltage selected level voltage
Repetition f 5000/s (3MHz) 5000/s (10 MHz) 5000/s (30 MHz)
Polarity each coupling positive and negative
Coupling Common Mode Lx-PE, N-PE, Lx+N-PE
Variable
parameters
Burst Time td 1 ms
– 50 ms
Depends on fast module setting 3, 10, 30 MHz
Repetition tr 0.0 s
– 99.9 s
Test duration 1 min
Damped
Page 5 (standard test in stop mode) (Running standard test)
Damped Osc. 3 MHz IEC 61000-4-18 L3 Damped Osc. 3 MHz IEC 61000-4-18 L 3
V = 2000 V Rep = 5000/s V = 2000 V Rep = 5000/s
Td = 50ms Td = 50ms
Tr = 0.3s
+ 2000 V
Tr = 0.3s
T = 1:00min
L Testtime
current coupling

0:00:21
START CHANGE
STOP Step complete test time

0:02:21
F1 F2 F3 F4 F5 F6 F7 F1 F2 F3 F4 F5 F6 F7
- The Test time shows the elapsed time per actual test level as
well as the complete time of all triggered test levels within the
running test sequence.
- Pushing the function key F2 STEP will bring you into the next
iteration sequence.