AmeriWater MRO3, Operation & Maintenance Manual

Page: 6 / 54

MRO 3 & 4 MANUAL
3
98-0140
Rev. F
SECTION 2 TECHNICAL INFORMATION
2.1 SPECIFICATIONS
Ideal, minimum, and maximum
incoming water temperature Min = 41° F (5° C) Max = 90° F (33° C)
Ideal Temperature = 77° F (25° C)
Inlet gauge pressure (when the
MRO is running)
Minimum
Maximum
20 PSI
90 PSI (
P ounds per S quare I nch)
Pump pressure –
Minimum
Maximum
160 PSI
270 PSI
Water pressure to dialysis machine Controlled by Loop return relief valve.
Maximum output of product water
@ 77°F (25°C), TDS<1000 ppm of
NaCl, & pump pressure of 150 psi.
MRO3 - 4200 GPD (15,897 LPD)
MRO4 - 5600 GPD (21,196 LPD)
(
G allons P er D ay / L iters P er D ay)
Connections
Feed =3/4” plain hose
Product = 1/2" plain hose
Drain = 1/2" plain hose
Electrical Requirements
For the controller: 115V/60Hz GFI ( G round
F ault I nterrupter)
For the pump: 230V single phase/15 Amp; or
208V, 230V, or 460V three phase/10 Amp fused
disconnect
Dimensions Packaged
Dimensions not Packaged
58" H x 42" W x 38" D
52”H x 18 ½”W x 18 ½”D
Shipping Weight 275 - 300 lbs.
Materials that Contact Product Water:
ABS Polyethylene
Acrylic Polypropylene
Carbon Stainless Steel
Nylon Thin Film Composite Membrane (polyimide)
PVC Tygon
Polyester
All of the above listed materials meet FDA and/or NSF standards.