American Megatrends ManageTrends 2.7, User Manual

Page: 311 / 367

Appendix H : UPS Configuration 293
The Slave nodes must also be configured through the ManageTrends using the UPS
configuration page by specifying the mode as “Slave” and entering the Master IP address.
The screenshot of configuring the slave node is shown below.
Configuring Slave Boxes
The status of the UPS can also be monitored using the CLI. The following examples
show how to use the CLI to find the type of UPS connected and monitor the status of it.
Monitoring UPS through CLI
[root@ITX003048841e04 ~]# cli get -i ups
Model Smart-UPS 1000
Status AC Power
Load 63 %
Battery charge 100 %
Time left 016 min
Mode Master/Single
Success.
[root@ITX003048841e04 ~]# cli get -i -m ups
Min Bat charge 45 %
Timeout 10 min
Mode Master/Single
Graceful
shutdown enable YES
Success.