American Megatrends ManageTrends 2.7, User Manual

Page: 301 / 367

Appendix F : Setting up DHCP from the Console Interface 283
Appendix F Setting up DHCP from the
Console Interface
If the StorTrends® iTX Storage Appliance cannot obtain an IP Address from your
network, check your network cable. Make sure it is plugged into the back of the chassis.
Also make sure that it is a good cable. Check to make sure that your switch is properly
configured (if it is a manageable switch).
If everything checks out with the network, check to make sure that the StorTrends® iTX
Storage Appliance is set to DHCP.
Logging on from the Console Interface
Go to the Console Interface on your StorTrends® iTX Storage Appliance. You should
see the following screen:
Begin typing the password. The
Please Authenticate field does NOT display the
password nor does it display asterisks in place of the password. It appears as if nothing is
happening while you are typing.
THIS IS NORMAL
.
The default password is
password in all lowercase. Press the <ENTER> key after you
enter the password.
AMI StorTrends Console Interface
System Info :
Host Name - ITXXXXXXXXXXXXX
Ip Address - XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX
System Date - MM/DD/YYYY
System Time - HH:MM:SS TZ
Build Info :
Software Version - X.X.XXXX
Build Date - MM/DD/YYYY
Please Authenticate
< O K > < C ancel >