American Megatrends ManageTrends 2.7 User Manual Download

Page: 169 / 367

Chapter Seven : Managing the Storage Appliance

151

Step Description

2 Select

the

Target

that you want to log on to. Notice that the

Status

of the

Target

Inactive

. Left click

the

Log On

button.

Note:

If the

Target

does not appear in the list, try the following:

•

Check to verify that you added the iSNS server in the

iSNS Servers

tab.

This is necessary if you are using the

iSNS Zoning

security feature on your

Storage Appliance.

•

If Zoning is not being used make sure that you have added the

Target

Portal

in the

Target Portals

tab.

You are prompted with the

Log On to Target

dialogue box. Left click the

button to proceed.

Summary of Contents for ManageTrends 2.7
















































































































































































































































































































































































Search results

Summary of Contents for ManageTrends 2.7

Reviews:

Related manuals for ManageTrends 2.7

Brands by name

Popular brands

American Megatrends ManageTrends 2.7, User Manual

Search results

Summary of Contents for ManageTrends 2.7

Reviews:

Related manuals for ManageTrends 2.7

Brands by name

Popular brands