background image

Glossary 

319

Domain Name 

 
That part of the Uniform Resource Locator (URL) that tells a domain name server using 
the domain name system (DNS) whether and where to forward a request for a Web page. 
The domain name is mapped to an IP address. 
 

Ethernet 

 
Ethernet is a registered trademark of the Xerox Corporation. It describes the way data 
packets are transferred between computers on a local area network (LAN). 
 

Ethernet 802.2 

 
Packet format that defines the standard for the data link layer. It is made up of two 
smaller layers called the logical link control (LLC) layer and the media access control 
(MAC) layer.  

 

+-----------+--------+---------+-------+-------+-------+---------- 
|destination| source |  length |  DSAP | SSAP  |control| data  >  
+-----------+--------+---------+-------+-------+-------+---------- 
                               <  1  > <  1   > <  1  > < 43-1497 >

 

 

Ethernet 802.3 

 
Packet format that defines the data link layer of a packet for bus type networks that use 
Carrier Sense Multiple Access / Collision Detection (CSMA/CD). The most common bus 
type networks are 10Base-T, 100Base-T (Fast Ethernet), and 1000Base-T (Gigabit 
Ethernet) networks. The letter 

T

 at the end designates RJ-45 Category 5 cable. 

 
Ethernet 802.3 is the standard that is used in most Ethernet cards and cables. 

 

+-----------+--------+---------+---------- 
|destination| source |  length |  data  >  
+-----------+--------+---------+---------- 
 <    6    > <   6  > <   2   > < 46-1500 >

 

 

Ethernet II 

 
Packet format that defines the data link layer of a packet. This is the original Ethernet 
standard. 
 

+-----------+--------+---------+---------- 
|destination| source |  type   |  data  >  
+-----------+--------+---------+---------- 
 <    6    > <   6  > <   2   > < 46-1500 >

 

 

 

Summary of Contents for ManageTrends 2.7
















































































































































































































































































































































































Reviews: