2-2
Operator's Manual
I M P O R T A N T
Although the T
OUCH
T
RACKER
allows you to select any of the
configurations via this menu, it will only recognize the unit to which it is
actually connected. Make sure you select the configuration that applies to
your setup. If your system is connected to a 16-camera multiplexer, do not
select a 9-camera multiplexer.
To assign the external unit, do the following:
1.
Press the
Menu
button on the Main T
OUCH
T
RACKER
.
The menu appears on the LCD. It looks like this:
Calibration
Define Sequence
2.
Use the Tracker Ball to scroll through the selections until “Config
Devices” is displayed on the LCD.
Alarm Actions
Config Devices
3.
Press the appropriate button— zoom or focus—to select Config Devices.
Use the following chart to determine your correct configuration.
Device = Quad
= POSEM
Choose this configuration if your
T
OUCH
T
RACKER
is connected to a
quad splitter.
Device = Mux 4
= POSEM
Choose this configuration if your
T
OUCH
T
RACKER
is connected to a
4-camera multiplexer.
