background image

Appendix B:  Software License Agreement

B-3

will have the right to take possession of all copies of the Software and
Documentation in the possession of Customer or to require Customer to
destroy all such copies and certify such destruction in writing to SEC.

4.

 

Ownership.  Customer agrees and acknowledges that (i) SEC (or its
suppliers) is the sole owner of the Software and Documentation
(including all copies thereof, in whatever form or media, delivered to or
made by Customer) and all patent, copyright and other intellectual
property rights with respect thereto and (ii) the Software and
Documentation constitute valuable trade secrets, confidential
information and proprietary properties of SEC and its suppliers.
Accordingly, Customer agrees that it will have no rights in the Software
or Documentation other than those granted under this License
Agreement and agrees to abide by the restrictions on its use of the
Software and Documentation set forth in Section 5 of this License
Agreement.

5.

 

Use and Copies. Customer may use the Software and Documentation
only in conjunction with the other equipment identified in the Equipment
Agreement, as part of the access control, closed circuit television or
other security system being acquired from SEC and for Customer's
internal business purposes.  SEC will furnish the Software to Customer
solely in object code form.

Customer may make up to 2 copies of the Software solely for back-up
and archival purposes.  Customer will not remove or modify the
copyright and other proprietary notices and legends of SEC and its
suppliers contained in the Software and Documentation and will
reproduce all such notices and legends on all copies of the Software
made by Customer.  Customer may not make copies of the
Documentation, but may obtain additional copies of the Documentation
from SEC at its established rates.  Except as permitted above, copying of
the Software and Documentation is forbidden.

Customer will not sell, assign, sublicense or transfer this license or sell
or otherwise transfer the Software or Documentation (or any portion
thereof) to others.  Customer will maintain the Software and
Documentation in confidence and not disclose any data or other

Summary of Contents for AD Touch Tracker 16













































































































Reviews: