Defining Automatic System Functions
4-15
video of wherever the camera (that you indicated in Step 6) is
currently pointing.
9.
Move the Tracker Ball to the right. In the
Out
field, indicate the specific
output that initiates when this alarm is triggered. Use the number buttons
to enter the number. Remember, this output must be connected to the
camera you assigned in Step 6.
If you do not want an output to be initiated, leave this field blank.
10.
Choose one of the following:
•
Do you want to set up another alarm input for this camera? If
so, use the Tracker Ball to scroll through the available inputs
until the appropriate input appears in the input field. Then repeat
Steps 6 through 9.
•
Do you want to set up an alarm for another camera? If so, press
the
Next
button on the keypad until the appropriate camera
number appears in the
Alarm Cam
field. Then, repeat Steps 5
through 9.
•
Are you finished setting up alarms for now? If so, press the
Menu
button. This returns the T
OUCH
T
RACKER
to the camera
control mode.
SpeedDome LT Auto Pan Programming
The Auto Pan is a special feature supported by SpeedDome LT only. It
allows you program a smooth side-to-side camera pan of an area. The
SpeedDome LT does not allow you to program the same types of Patterns
that other domes support. Instead, use Pattern programming to set the Auto
Pan function.
Auto Pan Programming Limitations
Keep the following limitations in mind when programming the SpeedDome
LT Auto Pan feature:
