A-6
Operator's Manual
List of Patterns
We recommend that, as you define Patterns to meet the needs of your
facility, you then record those Patterns in this Appendix. That way, you will
have an easy way to access the following information:
•
the approximate location of the domes at your facility
•
which domes have Patterns defined for them
•
how many Patterns have been defined for each dome
•
a brief description of each Pattern
In addition, if you record the Patterns that you have defined, it will be easier
for you to determine which Patterns you want to include when you set up the
Sequence and the alarms.
Here is an example of how you might fill out your list of Patterns:
Dome
Number:
__12__
Dome
Type:
SpeedDome
Location:
Loading Dock_______
Pattern Number:
_1_
Description:
___Parking Lot________________________________
Pattern Number: _
2_
Description:
___Emergency Exit____________________________
Pattern Number:
_3_
Description:
____Loading Dock 1___________________________
Note
SpeedDome, SpeedDome Ultra, SpeedDome Ultra II, and SpeedDome Ultra
III support up to 3 patterns. SpeedDome LT does not support pattern
programming; however, Pattern 1 is used for programming the auto pan
feature of SpeedDome LT.
Be sure to make a sufficient number of copies of the Pattern worksheet to
document all patterns programmed.
