2-4
Operator's Manual
Displaying Video with Quad Splitters
Quad splitters give you the ability to see video from up to eight cameras. The
video can be viewed from each camera individually (refer to Chapter 3), or it
can be displayed in quad mode.
When cameras are displayed in the
quad mode, you will be able to see
video from four cameras at once on
the monitor
The camera number appears in the
bottom of its respective quadrant on
the monitor.
1
2
3
4
QUAD DISPLAY MODE
Although as many as 8 cameras may be connected to your system, only 4
cameras can be displayed at one time. If your system is connected to a dual
page quad splitter, the cameras will be divided into two “pages.” Cameras 1
through 4 appear on page one; cameras 5 through 8 appear on page two. To
switch back and forth between page one and page two, press the
Display
button on the Main T
OUCH
T
RACKER
. Each time you press the
Display
button, you change the monitor display from page one, to page two, to full-
screen display.
Regardless of which display format you choose, you will always have
control over the camera number appearing on the LCD.
Tip: If your system includes only one monitor, press the
Display
button to
put the monitor in the quad display format. Press the number associated with
an individual camera to call that camera to the full-screen mode (or select
the full-screen display mode via the
Display
button).
If your system includes two monitors, the Main monitor will be dedicated
for quad display and the Call monitor will be dedicated for full-screen
