Amcrest IP2M-858B, User Manual, Page: 74 / 109

74
o
Preset : Allows the user to add and delete preset options for PTZ functionality. To begin
adding a preset to your camera, click the Add button. To refresh the screen click Refresh , to
delete a preset, press Delete or to remove all the presets, click Remove All .
o
Tour : Allows the user to string multiple presets together. For more information on setting up
tours, visit section 5.2 PTZ of this user manual.
o
Scan : Allows the user to set automatic scan presets to the camera. For more information on
setting a scan preset visit section 5.2. PTZ of this user manual
o
Pattern: Allows the user to set specific PTZ pattern presets to the camera. For more
information on setting PTZ patterns visit section 5.2 PTZ of this user manual.
o
Pan: Allows the user to adjust pan speeds related to established pan presets. For more
information on pan presets visit section 5.2 of this user manual.
o
PTZ Speed: Allows the user to adjust pan, tilt, and zoom speeds. There are 3 separate PTZ
speeds for this function; Low, Middle, and High.
o
Idle Motion : Allows the user to set intervals of idle time before the preset quits. The idle
time can be set from 1 ~ 60 minutes.
o
Time Task: Allows the user to set scheduled periods for PTZ presets to occur. To set a
schedule, click the Enable check box and select the time task action from the Task Set menu.
If you want the time task to automatically return to a specific position in a certain period of
time, enter the value in the
AutoHome field. This option is set to default every 30 seconds,
however, this can be adjusted from 5 ~ 3600 seconds. Once this value is set, click the
Scheduled button:
Click and drag to set motion detection for certain days of the week. Also, periods of motion
detection can be set for each day and enabled using the period settings on the bottom half
of the screen. There are a total of 6 periods that can be set. Once you have completed the
time task schedule, click the
Save button to save the settings to your camera.
o
PTZ Restart : Allows the user to refresh and restart the PTZ function being performed. To
restart the PTZ function, click the PTZ Restart button.
o
Reset Defaults : Allows the user to reset all PTZ functions set in the camera to default. Click
the Reset Default button to reset any set PTZ functions.
In this field you will also notice an additional quick access to the PTZ control panel.