10
3. Gently press the card into place within the slot to click and lock the
microSD card into place.
3.4 Physical Installation Guide
This installation guide will highlight how to properly install and mount your camera in several different
environments. These environments included; wood, masonry (brick /block walls), and cement. Prior to installation,
please ensure that the installation environment can support at least three times the weight of the camera and the
installation bracket.
Note:
There are 3 carabiners included with the camera. These carabiners will be used to provide additional support
to the camera after installation. To install, link one carabiner to the mounting bracket then link the third carabiner
to the camera.
The camera will come with proper installation materials such as screws and anchors already, however, if
replacements are needed a 9/16 lag bolt, masonry anchor, cement anchor will be required.
Please ensure the following tools are available and ready for use:
o
Power Drill/impact Drill
o
9/16 Drill Bit (Masonry)
o
9/16 Hex Head Drill Bit
o
Marker or Sharpie
o
Hammer/Impact
o
Safety Glasses
o
3/16 Allen wrench
o
1” Paddle Bit (In
-wall Installation)
Note:
In-wall installation is when the cables run hidden inside the ceiling
or wall.