67
Below is an explanation of fields on the UPnP settings screen:
•
Enable
: This checkbox allows the user to enable the UPnP function.
•
Router State
: This field shows the UPnP status and has two options:
Unknown
: This
means that
UPnP mapping has failed.
Successful
: This means that UPnP mapping has succeeded.
•
Port Mapping List
: This table is used to show how the ports for each protocol listed
below have been remapped by the UPnP protocol.
o
The first column shows the checkboxes to enable the corresponding service on
the table.
o
The second column shows the name of the services. To edit this, double click on
the service line item.
o
The third column shows the name of the protocol used by that service. To edit
this, click the pencil button in the modify column for that line item.
o
The fourth column shows the Internal Port used by that service to establish
communication from the router to the camera. To edit this, click the pencil
button in the modify column for that line item.
o
The fifth column shows the External Port used by that service to establish
communication from the router to the internet. To edit this, click the pencil
button in the modify column for that line item.
o
The sixth column shows the status of the protocol. If the protocol was mapped
successfully, this field will say “Mapping Succeeded”.
o
The seventh column allows the user to op
en a dialog box and edit the service’s
information.