47
adjusted accordingly. You can use this function when the whole video is
too dark or too bright. Please note the video may become hazy if the
value is too high. The recommended value ranges from 40 to 60.
Contrast
: This slider is used to adjust playback and recorded video
window contrast. The value ranges from 0 to 100. The default value is
50. The larger the number is, the higher the contrast is. You can use this
function when the whole video brightness is OK but the contrast is not
correct. Please note the video may become hazy if the value is too low.
If this value is too high, the dark section may lack brightness while the
bright section may over expose. The recommended value ranges from
40 to 60.
Saturation
: This slider is used to adjust playback and recorded video
window saturation. The value ranges from 0 to 100. The default value is
50. The larger the number, the stronger the color is. This value has no
effect on the general brightness of the whole video. The video color may
become too strong if the value is too high. For the grey part of the
video, distortion may occur if the white balance is not accurate. Please
note the video may not be clear if the value is too low. The
recommended value ranges from 40 to 60.
Chroma CNT:
This slider is used to adjust how pure or monochromatic
the image will be compared to a white surface. The value ranges from 0
to 100. The default value is 50. The larger the number, the stronger the
purity of the color. The value has no effect on general brightness or
clarity of the video stream however, if the values are too high it could
cause stream issues. It is recommended to keep this value at the default
setting of 50 to avoid streaming issues.
Sharpness
: This slider is used to adjust the sharpness of the video. The
value ranges from 0 to 100. The larger the value is, the clearer the edges
are and vice versa. Note: The higher the value, the higher likelihood of
picture noise occurring. The default value is 50 and the recommended
value ranges from 40 to 60.
Sharpness CNT
: This slider is used to adjust how pure or monochromatic
the sharpness of the image will be compared to a white surface. The
default value is 50. The larger the number, the stronger the purity of the
sharpness. The value has no effect on general brightness or clarity of the
video stream however, if the values are too high it could cause stream
issues. It is recommended to keep this value at the default setting of 50
to avoid streaming issues.
Gamma
: This slider is used to adjust the gamma of the video. The larger
the number, the brighter the video is. The default value is 50 and the
recommended value ranges from 40 to 60.