Amazone GreenDrill GD200-E, Operating Manual

Page: 34 / 106

Structure and function
34
GreenDrill BAH0108-0 03.20
4.1.4 Calibration test
For calibration and when emptying the seed
hopper, the seed drops into the collection bucket
via the chute (1).
Always perform a calibration test

during the initial operation

when changing the sort.

if the same sort is used, but of a different quality and specific weight.

after changing the seed metering wheels

if the seed hopper is emptied faster/slower than expected. The actual spread rate then does not
correspond with the spread rate determined by calibration.

when changing the working speed
(not required when terminal 5.2 is connected to the 7-pin signal socket of the tractor or to the
radar or GPS device).