GreenDrill control terminal 5.2
GreenDrill BAH0108-0 03.20
61
14. Select the display with the
buttons.
15. Confirm the selection with the
button.
16. Using the
buttons, set the time 1
)
2
)
during which the
seeding shaft will rotate for calibration (e.g. 0.5 min).
17. Confirm the entry with the
button.
1)
Calibrate for 0.5 minutes
for seeds such as wheat, barley, peas and high spread rates
Calibrate for 1.0 minute
for all seed types (standard)
Calibrate for 2.0 minutes
for fine seeds, e.g. rapeseed and phacelia.
2)
The "Calibration duration" menu item does not appear when
the GreenDrill has a calibration button (see section 6.6.3, page 62) and
the menu item "Calibration button available" (see section 7.1.9, page 91) is answered with
"YES".
18. Select the display with the
buttons.
19. Confirm the selection with the
button.
The calibration starts.
The seeding shaft begins to rotate (without fan).
The seeding shaft stops automatically after the set time
has elapsed.
Keep the calibration button (if available) pressed for the
duration of the calibration test. The seeding shaft stops
after the button is released.
Do not select a shorter duration for the calibration than
specified (see instructions for point 16).
Summary of Contents for GreenDrill GD200-E
Page 2: ......
Page 32: ...Structure and function 32 GreenDrill BAH0108 0 03 20 4 1 1 6 Seed metering wheel table ...
Page 105: ......
