1. For the desired rate control, tap on
.
Setpoint
: The setpoint is used when the application
rate should only be controlled using a fixed setpoint
or when the values for the application rates are
missing in application maps.
Out of field value
: When the implement exits the
field, this value is transmitted as the application rate.
Position lost value
: When the GPS signal is lost,
this value is transmitted as the application rate.
2. Adjust the fallback value using the corresponding
button.
5.2 Documenting the product information
The products used and the corresponding product
quantities can be included in the job documentation. To
do so, a list of products can be created when configuring
rate control. Product information can also come from a
Farm Management Information System and can be
adjusted before starting work.
NOTE
The specification of the product quantity only serves
for documentation purposes and does not affect the
application rate.
056951
Q | Using rate control| Configuring rate control
MG5574-
EN
-II | B.1 | 25.10.2016
204