Amazone AMAPAD Operating Instructions Manual Download

Page: 55 / 237

NOTE

Firmware upgrades can only be performed on the
following GPS receivers:

SGR-1

AGI-3

AGI-4

1. In the setup menu, tap on

"System"

"GPS"

"Receiver"

2. Tap on

"Firmware upgrade"

3. Confirm the update.

A warning is shown saying that the AMAPAD must
not be switched off.

4. Acknowledge the warning.

The firmware upgrade starts.

The AMAPAD will be restarted after the firmware
upgrade.

Using the ignition line

NOTE

This function is only available for the following GPS
receivers:

AGI-4

1. In the setup menu, tap on

"System"

"GPS"

"Receiver"

2. Tap on

"Use ignition line"

005391

F | Configuring the AMAPAD | Entering the system settings

MG5574-

-II | B.1 | 25.10.2016

Summary of Contents for AMAPAD














































































































































































































































Search results

Summary of Contents for AMAPAD

Reviews:

Related manuals for AMAPAD

Brands by name

Popular brands

Amazone AMAPAD, Operating Instructions Manual

Search results

Summary of Contents for AMAPAD

Reviews:

Related manuals for AMAPAD

Brands by name

Popular brands