1
Boundary offset
2
Edge of the boundary area
3
Boundary line on the AMAPAD
NOTE
The boundary offset serves to precisely record the
boundary line. Determine the exact boundary offset.
1. In the job menu, tap on
.
2. Call up the
"Boundary offset"
menu with
.
3. Under
" Offset for recording "
, enter the side of the
implement on which the boundary line is being
recorded.
4.
If the boundary offset should be increased:
Enter a positive value under
" Additional offset "
.
or
If the boundary offset should be reduced:
Enter a negative value under
" Additional offset "
.
5. Under
" Recording position "
, enter the the exact
position at which the boundary line is being
recorded.
J | Managing fields | Creating a boundary line
MG5574-
EN
-II | B.1 | 25.10.2016
130
