NOTE
The AMAPAD normally automatically detects the TC
version.
To define the TC version, the following applies:
AMAZONE implements: TC version 3
For Peer Control: TC version 4
1. Select
"Setup menu"
>
"System"
>
"ISOBUS"
>
"TC"
.
2. Tap on
"TC version"
.
3. Select the TC version.
Defining the TC number
If several terminals are connected to an implement, the
AMAPAD can be clearly identified by the TC number.
Each terminal needs a different TC number to avoid
conflicts.
1. Select
"Setup menu"
>
"System"
>
"ISOBUS"
>
"TC"
.
2. Tap on
"TC number"
.
3. Enter the TC number.
Defining the control mode for manual part-width section control
If automatic part-width section control is disabled, the
part-width sections can still be controlled manually. This
setting defines whether the part-width section can be
controlled using the virtual part-width section switch.
009194
048298
F | Configuring the AMAPAD | Entering the system settings
MG5574-
EN
-II | B.1 | 25.10.2016
66
