3. Enable the headlands under
"Headlands"
.
4. Under
"Headland width"
, enter the distance between
the boundary line and the headland boundary.
Under the
"Headland offset"
setting, a negative and a
positive value can be entered to shift the headland
boundary.
5.
If the headland boundary should be shifted,
enter the value for the offset under
"Headland
offset"
.
6. Under
"Look ahead"
, enter the distance from the
headland boundary at which the set actions should
be performed.
7.
If actions should be triggered when the vehicle
approaches the headland,
8. Confirm the settings with
.
4.1 Configuring headland actions
The AMAPAD can perform 2 headland actions when the
vehicle approaches the headlands:
Issue an alarm
Enlarge the map
005677
J | Managing fields | Configuring the headlands
MG5574-
EN
-II | B.1 | 25.10.2016
138
