manualshive.com logo in svg

Amazone AMAPAD, Operating Instructions Manual

Share
Download
Amazone AMAPAD Operating Instructions Manual Download Page 179

NOTE

The provided AUX-N assignments must be confirmed
every time the AMAPAD is started.

NOTE

It can take up to 2 minutes for the implement or the
external input device to send the AUX-N assignments.

When the AMAPAD has been started and an implement
or external input device is connected, a message is
shown with the provided AUX-N assignments.

The following selection options are available:

Accept provided AUX-N assignments

Change provided AUX-N assignments

Accept provided AUX-N assignments

If the provided AUX-N assignments should be
accepted without changes,

tap on 

"Yes"

.

Changing provided AUX-N assignments

1.

If the provided AUX-N assignments should be
changed,

tap on 

"List"

.

012260

012261

N | Using the Universal Terminal| Using automatic AUX-N assignments

MG5574-

EN

-II | B.1 | 25.10.2016

177

Summary of Contents for AMAPAD














































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands