Amazone AMAPAD Operating Instructions Manual Download

Page: 85 / 237

If a profile should be created for the implement,

confirm with

"Yes"

NOTE

Other options:

"No"

: An implement profile will not be created. The

AMAPAD saves this selection and no longer opens
the assistant for this implement.

"Cancel"

: An implement profile will not be created.

The AMAPAD will reopen the assistant when the
implement is connected again.

2. Select the implement type.

NOTE

Implement types from left to right and from top to
bottom:

Rigid

Towed

Front-mounted

With two pivot points

Self-propelled

F | Configuring the AMAPAD | Configuring an implement

MG5574-

-II | B.1 | 25.10.2016

Summary of Contents for AMAPAD














































































































































































































































Search results

Summary of Contents for AMAPAD

Reviews:

Related manuals for AMAPAD

Brands by name

Popular brands

Amazone AMAPAD, Operating Instructions Manual

Search results

Summary of Contents for AMAPAD

Reviews:

Related manuals for AMAPAD

Brands by name

Popular brands