26
PIX-25
Clear Reset Tracking Data (Code
43
)
By entering code 43, all data from current tracking parameters will be
cleared. It will not clear data from the initial tracking data.
Clear Custom Data (Code
44
)
By entering code 44, all custom data will be cleared.
Acceptable Print Media
Print Media is defined as the type of material you will be using in the
machine to time stamp (time cards, documents, etc.). To avoid damaging
the print head, it is recommended that you do not exceed a media thickness
of 0.3 mm (0.01"). The following are general specifications for the different
media dimensions.
Time Card:
Time card thickness less than or equal to 0.3 mm (0.01").
Small Ticket:
Tickets, slips, receipts or other validation media should be
no smaller than 100 mm (4”) long x 60 mm (2.25") wide.
Larger Paper:
When using standard paper sizes, such as 8.5" x 11", if
the weight of the paper (thickness) is too light, the paper will curl up and
tear off inside the PIX-25 clock. This may result in jams or damage to the
clock.
Note
– Amano recommends using the manual print method (see
“Setting the Print Method”) for large paper and transparent media
printing.
Carbon Paper:
The PIX-25 clock will print on both carbon and carbonless
paper. The imprint will print through up to four copies, depending on the
quality of the document used. Carbon and carbonless paper deteriorates
over time. Humidity, high temperatures and sunlight accelerate this
process. For maximum print performance, use only high grade,
uncontaminated carbon or carbonless paper.
Atomic Clock Feature (Not available in HI and AK)
The atomic clock receives time signals on long wave radio (60 kHz) from the
National Institute of Standards and Technology (NIST) radio station WWVB,
located in Fort Collins, Colorado, which is coupled with the
atomic cesium clock in Boulder; no other time-code signal
is supported. The PIX-25 receives the WWVB time signal
via its built-in antenna system. Your clock will try to find
the signal continuously if this feature is enabled.
When the clock is powered on, the time is changed, or the
Reset
button is
: 866-487-4751
VISIT: WWW.TIMECLOCKEXPERTS.COM
